Table of Contents
Advertisement
Switching On the System
Figure 62:
4. Switch off the multiple socket outlet on the trolley. Switch on the SMD workstation if it
does not start up automatically.
5. Check whether the microscope is switched on. The microscope is operational once the
readiness indicator (Figure 63, item 1) on the toggle switch is lit up. If the readiness
indicator is not lit, activate the electronics box toggle switch (Figure 63, item 2).
Figure 63:
6. If your system has an infrared laser (MP) or an optical parametric oscillator (OPO),
switch on the NDD detection unit.
Figure 64:
92
Overview of the main switch board on the flexible supply unit
Microscope electronics box
Switch on the NDD detection unit
Advertisement
Table of Contents
