Switching Off the System
Figure 216:
10. If your system is equipped with an NDD detection unit, switch it off:
Figure 217:
11. Shut down both workstations.
12. Switch off the lasers (see Figure 211, item 2) and the scan head (see Figure 211, item 1)
on the front side of the compact supply unit.
13. Turn off the microscope by actuating the electronics box toggle switch (Figure 218,
item 2). The readiness indicator (Figure 218, item 1) on the electronics box goes out.
Figure 218:
14. Turn off any accessories being used.
236
HyD RLD supply unit
NDD detection unit
Microscope electronics box