Switching Off the System
2. Close the LAS AF software: On the menu bar, select File > Exit.
Figure 210:
3. Save all relevant data in SymPhoTime and close the SymPhoTime software.
4. Turn off the lasers in the supply unit with the key switch on the front side of the compact
supply unit (see Figure 211, item 3).
Figure 211:
The emission warning indicator goes out.
5. If you are using a DSN102 power supply, switch off the detectors by pressing the channel
buttons on DSN 102.
6. If you are using the PDL 828 Sepia II laser driver, set the key switch to the "OFF" position.
7. If you are using an external 355 and 405 (inclusive) UV laser, use the following key switch
to turn it off (not possible for FLIM, FCS and FLCS images). The emission warning
indicators go out.
234
Shutting down LAS AF
Overview of the Control Panel Field on the Compact Supply Unit