Table of Contents
Advertisement
Switching On the System
Figure 66:
13. If you are using an external 355 and 405 (inclusive) UV laser, make sure that the power
switch is in the "On" position (not possible for FLIM, FCS and FLCS images).
Figure 67:
Figure 68:
14. Press the following key switches to switch on the external UV laser 355 including 405:
94
Key Switch for the White Light Laser
White Light Laser Error Messages
An error report appears in the display of the white light laser.
• if the room temperature exceeds 40°C -> the white light laser switches
itself off and can only be turned back on after the room cools off.
• In case of mechanical shock or vibrations -> switch off the white light
laser and turn it back on after 10 seconds.
Power switch on external UV laser 355
Power switch on external UV laser 405
Advertisement
Table of Contents
