Table of Contents
Advertisement
Figure 150:
Annotation file in the workspace overview in SymPhoTime
1. You can enter individual information (such as measurement type, specimen etc.)
manually.
2. For access to certain acquired individual images of an individual FLIM measurement, the
image can be recalculated using the options... button.
A window with image specifications pops up (Figure 151).
3. Enter the individual images to be selected for the analysis in the Accumulate Frames
field (from individual image No._to individual image No._).
Figure 151:
Changing the selection of the individual image numbers for the analysis in the
SymPhoTime Software
Summarized manual for FLIM experiments
171
Advertisement
Table of Contents
