Changing Detector Connections on the Scan Head and Router When Using HyD-RLD
Figure 194:
Terminals for the FLIM signal cable on HyD RLD, which are connected to the CFD input
connector on the PHR 800 router
Figure 195:
MPD APD (SPAD): The upper cable of each SPAD unit is connected to the PHR 800 router (see
Figure 191, terminals left); the respective lower cable is connected with the signal converter
(see Figure 196)
Figure 196:
Signal converters to connect the image signal cable of the MPD APDs (SPAD 1 and SPAD 2) to
the scan head's APD printed circuit board (see Figure 190)
227