Table of Contents
Advertisement
Switching On the System
10. To switch on the laser in the supply unit, press the key switch on the front side of the
compact supply unit (see Figure 75, item 3).
WARNING
11. If you are using an external 355 and 405 (inclusive) UV laser, make sure that the power
switch is in the "On" position (not possible for FLIM, FCS and FLCS images).
Figure 76:
Figure 77:
12. Press the following key switches to switch on the external UV laser 355 including 405:
Figure 78:
98
Risk of permanent eye and skin damage from laser radiation
From this time on, laser radiation may be present in the specimen area of
the laser scanning microscope. Make sure to follow the safety notes for
operation of the system.
Power switch on external UV laser 355
Power switch on external UV laser 405
Key switch on the power supply of external UV laser 355
Advertisement
Table of Contents
