Platform Or Boom Caught Overhead; Emergency Towing Procedures - JLG 0300203771 Operation & Maintenance Instructions Manual

SECTION 5 - EMERGENCY PROCEDURES

Platform or Boom Caught Overhead

If the platform or boom becomes jammed or snagged in overhead
structures or equipment, do the following:
1. Shut off the machine.
2. Rescue all people in the platform before freeing the
machine. Personnel must be out of the platform before
operating any controls on the machine.
3. Use cranes, forklifts, or other equipment to stabilize motion
of the machine to prevent a tip over as required.
4. From the ground controls, use the Auxiliary Power System (if
equipped) to carefully free the platform or boom from the
object.
5. Once clear, restart the machine and return the platform to a
safe position.
6. Inspect the machine for damage. If the machine is damaged
or does not operate properly, turn off the machine immedi-
ately. Report the problem to the proper maintenance per-
sonnel. Do not operate the machine until it is declared safe
for operation.
5-2
5.4

EMERGENCY TOWING PROCEDURES

Towing this machine is prohibited. However, provisions for moving
the machine have been incorporated. The following procedures are
to be used ONLY for emergency movement to a suitable mainte-
nance area.
THE ALLOWABLE TOWING SPEED IS 1.9 MPH (3 KPH). THE MAXIMUM ALLOWABLE
TOWING DISTANCE IS 0.6 MILES (1 KM).
1. Chock wheels securely.
2. Engage the mechanical release on both drive hubs by loos-
ening, completely reversing, and tightening the two bolts on
each hub.
3. Connect suitable equipment, remove chocks, and move
machine.
3121670