Settings Using Switches On The Camera; Adjusting Headset Volume - Ikegami HDK-790GX Operation Manual

5.1 Settings Using Switches on the Camera

Adjusting Headset Volume

This chapter explains how to control the headset volume.
Caution:
Do not set the INCOM-1 control knob, INCOM-2 control knob, INCOM-1 PGM-1/2 control knob, and INCOM-2 PGM-1/2 control
knob to near maximum level from the beginning. Setting the volume level too high with the intercom headset on your ears may
damage your eardrums. If you suddenly set the volume level too high, it may also damage the headset. Excessive sound pressure from
the headset may cause a hearing loss.
INCOM-1 MIC SELECT switch
INCOM-1 INCOM connector
INCOM-1 PGM-1 control knob
INCOM-1 INCOM control knob
- - -
Adjusting Intercom Volume
The intercom receiver can be adjusted on the rear side of the camera.
1
Turn the INCOM-1 control knob and INCOM-2 control knob on the rear of the camera to adjust the volume.
Caution:
- - - Be sure to adjust the volume to the appropriate level while listening to sound through the headset.
Adjusting Intercom PGM Volume
The intercom PGM volume can be controlled on the rear side of the camera.
1
Turn the INCOM-1 PGM-1/2 control knob and INCOM-2 PGM-1/2 control knob on the rear of the camera to
adjust the volume.
Caution:
Be sure to adjust the volume to the appropriate level while listening to sound through the headset.
INCOM-1 MIC switch
INCOM-1
INCOM MIC SEL
MIC
ON PROD
OFF BOTH OFF
PTT ENG PTT
PGM-1 PGM-2
INCOM-1 PGM-2 control knob
HDK-790GX 1403 VER1 (U)
5.1 Settings Using Switches on the Camera
INCOM-2 MIC switch
INCOM-2 MIC SELECT switch
INCOM-2
INCOM MIC SEL
MIC
ON PROD
BOTH
ENG
PGM-1 PGM-2
INCOM-2 INCOM connector
INCOM-2 PGM-2 control knob
INCOM-2 INCOM control knob
INCOM-2 PGM-1 control knob
5
65