Din Rail Bracket; Screw Holes For Wall Brackets; Figure 7: Example Of The Alarm Out Port - Allied Telesis AT-IE300-12GP Installation Manual

Chapter 1: Overview

DIN Rail Bracket

Screw Holes for Wall Brackets

40
from closed to open. The alert device, detecting the change to the circuit,
turns on the LED. When the switch detects that all its ports have links
again, it closes the circuit, which turns off the LED.
Alarm devices are not available from Allied Telesis.
Blue LED
Circuit closed - LED off
Circuit open - LED on
Figure 7. Example of the Alarm Out Port
The switch comes with one DIN rail bracket pre-installed on the back
panel. The bracket is compatible with DIN 35x7.5mm rails.
The back panel has four holes for securing the two wall brackets included
in the accessory kit.