Removing The Heim Joint; Installing The Heim Joint - KTM 400 EXC AUS 2011 Repair Manual

04LSHOCK ABSORBER, SWINGARM
50
RemDYinlllle heim jDint
Condition
The shock absorber has been demounted.
- Clamp the shock absorber in a vise using soft jaws.
- Remove the collar bushing of the heim joint.
I
Pin (Tl20) ( .. p. 262)
- Turn the shock absorber around and remove the second heim joint collar bushing.
- Remove seal ring
0
on both sides.
- Press the heim joint against a lock ring using the special tool.
I
Pressing tool (Tl207S) ( .. p. 263)
- Remove the second lock ri ng •.
- Place special tool
e
underneath and press out heim joint
e
using special tool
e.
I
Pressing tool (Tl207S) ( .. p. 263)
- Position new heim joint
0
and special tool.
I
Pressing tool (Tl206) ( .. p. 263)
- Press in the heim joint all the way.
04LSHOCK ABSORBER, SWINGARM
50
RemDYinlllle heim jDint
Condition
The shock absorber has been demounted.
- Clamp the shock absorber in a vise using soft jaws.
- Remove the collar bushing of the heim joint.
I
Pin (Tl20) ( .. p. 262)
- Turn the shock absorber around and remove the second heim joint collar bushing.
- Remove seal ring
0
on both sides.
- Press the heim joint against a lock ring using the special tool.
I
Pressing tool (Tl207S) ( .. p. 263)
- Remove the second lock ri ng •.
- Place special tool
e
underneath and press out heim joint
e
using special tool
e.
I
Pressing tool (Tl207S) ( .. p. 263)
- Position new heim joint
0
and special tool.
I
Pressing tool (Tl206) ( .. p. 263)
- Press in the heim joint all the way.