9
SHOCK ABSORBER, SWINGARM
9.16
Removing the heim joint
–
Check the heim joint for damage and wear.
»
If there is damage or wear:
–
Change the heim joint.
300460-01
Condition
The shock absorber has been removed.
–
Clamp the shock absorber in the vise using soft jaws for protection.
–
Remove collar bushing
Pin (T120) (
–
Turn over the shock absorber and remove collar bushing
Pin (T120) (
200577-10
–
Remove seal rings
200578-10
–
Remove lock rings
200579-10
of the heim joint.
1
p. 224)
p. 224)
on both sides.
3
on both sides.
4
47
of the heim joint.
2