Removing The Heim Joint - KTM 50 SX Repair Manual
Hide thumbs
Also See for 50 SX:
- Owner's manual (91 pages) ,
- Setup instructions (19 pages) ,
- Owner's handbook manual (26 pages)
Table of Contents
Advertisement
04/SHOCK ABSORBER, SWINGARM
Removing the heim joint
6.14
–
Remove locking cap
300390-10
Condition
The shock absorber has been removed.
–
Clamp the shock absorber into the vise using soft jaws.
–
Remove collar bushing
Pin (T120) (
–
Turn around the shock absorber and remove collar bushing
Pin (T120) (
200577-10
–
Remove seal rings
200578-10
–
Remove lock rings
200579-10
–
Place special tool
Pressing tool (T1207S) (
200580-10
and rubber buffer
.
of the heim joint.
p. 150)
p. 150)
on both sides.
on both sides.
underneath and press out the heim joint using special tool
p. 151)
28
of the heim joint.
.
Advertisement
Table of Contents
