321Clutch; Checking The Fluid Level Of Hydraulic Clutch; Changing The Hydraulic Clutch Fluid - KTM 400 EXC AUS 2011 Repair Manual

Hide thumbs Also See for 400 EXC AUS 2011:
Table of Contents

Advertisement

321CLUTCH
175
Checkinllhe lIuid level of hydraulic clutch
Warning
Skin irritation
Brake fluid can cause skin irritation on contact.
-
Avoid contact with skin and eyes, and keep out
of
the reach of children.
-
Wear suitable protective clothing and goggles.
-
If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.
Inlo
I
The fluid level rises with increasing wear of the clutch lining disc.
Avoid contact between brake fluid and painted parts. Brake fluid is corrosive!
Use only clean brake fluid from a sealed container.
Chanlinllhe !lY!!raulic clutch lIuid
Warning
-
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
-
Remove screws •.
-
Remove cover. with membrane •.
-
Check the fluid level.
I
Fluid level under top level of container
14
mm (0.16 in)
If the level of the fluid does not meet specifications:
-
Correct the fluid level of the hydraulic clutch.
I
Brake fluid DOT
41
DOT 5.1 (
..
p. 250)
-
Position the cover with the membrane. Mount and tighten the screws.
Inlo
I
Clean up overflowed or spilt fluid immediately with water.
Skin irritation
Brake fluid can cause skin irritation on contact.
-
Avoid contact with skin and eyes, and keep out of the reach of children.
-
Wear suitable protective clothing and goggles.
-
If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
-
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
I
The fluid level rises with increasing wear of the clutch lining disc.
Avoid contact between brake fluid and painted parts. Brake fluid is corrosive!
Use only clean brake fluid from a sealed container.
-
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
-
Remove screws •.
-
Remove cover. with membrane •.
321CLUTCH
175
Checkinllhe lIuid level of hydraulic clutch
Warning
Skin irritation
Brake fluid can cause skin irritation on contact.
-
Avoid contact with skin and eyes, and keep out
of
the reach of children.
-
Wear suitable protective clothing and goggles.
-
If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.
Inlo
I
The fluid level rises with increasing wear of the clutch lining disc.
Avoid contact between brake fluid and painted parts. Brake fluid is corrosive!
Use only clean brake fluid from a sealed container.
Chanlinllhe !lY!!raulic clutch lIuid
Warning
-
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
-
Remove screws •.
-
Remove cover. with membrane •.
-
Check the fluid level.
I
Fluid level under top level of container
14
mm (0.16 in)
If the level of the fluid does not meet specifications:
-
Correct the fluid level of the hydraulic clutch.
I
Brake fluid DOT
41
DOT 5.1 (
..
p. 250)
-
Position the cover with the membrane. Mount and tighten the screws.
Inlo
I
Clean up overflowed or spilt fluid immediately with water.
Skin irritation
Brake fluid can cause skin irritation on contact.
-
Avoid contact with skin and eyes, and keep out of the reach of children.
-
Wear suitable protective clothing and goggles.
-
If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
-
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
I
The fluid level rises with increasing wear of the clutch lining disc.
Avoid contact between brake fluid and painted parts. Brake fluid is corrosive!
Use only clean brake fluid from a sealed container.
-
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
-
Remove screws •.
-
Remove cover. with membrane •.

Advertisement

Table of Contents
loading

Table of Contents