Removing The Fork Proteclor; Inslalling Ihe Fork Protector - KTM 400 EXC AUS 2011 Repair Manual

Ol/FORK, TRIPLE CLAMP
Installinalha fork p'rDIBctor
600878-10
(EXC USA, all SIX DAYS models)
- Fully tighten
screw •.
Guideline
Screw, top triple clamp
- Tighten screws •.
Guideline
Screw, bottom triple clamp
(EXC EUIAUS)
- Fully tighten
screw •.
Guideline
Screw, top triple clamp
- Tighten screws •.
Guideline
Screw, bottom triple clamp
MB
MB
MB
MB
- Position brake caliper, mount and tighten
screws •.
Guideline
Screw, front brake caliper MB
- Mount cable clip
e.
25 Nm
(1B.4 Ibf
It)
17 Nm
(12.5 Ibf
It)
12 Nm
(8.9 Ibf ft)
20 Nm
(14.B Ibf
It)
15 Nm
(11.1 Ibf It)
Locti!.- 243'"
- Position the brake line and wiring harness. Put the clamp on, mount and tighten
screws •.
- Install the front wheel. (-- p. 71)
- Remove the fork legs. (-- p. 14)
- Remove screws. on the left fork leg. Remove the fork protector upwards.
- Remove the screws on the right fork leg. Remove the fork protector upwards.
- Position the fork protection on the left fork leg. Mount and tighten screws
O.
Guideline
15
I
Remaining screws, chassis
110 Nm (7.4 Ibf It)
I
- Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
I
Remaining screws, chassis
110 Nm (7.4 Ibf It)
I
- Install the fork legs. (-- p. 14)
Ol/FORK, TRIPLE CLAMP
Installinalha fork p'rDIBctor
600878-10
(EXC USA, all SIX DAYS models)
- Fully tighten
screw •.
Guideline
Screw, top triple clamp
- Tighten screws •.
Guideline
Screw, bottom triple clamp
(EXC EUIAUS)
- Fully tighten
screw •.
Guideline
Screw, top triple clamp
- Tighten screws •.
Guideline
Screw, bottom triple clamp
MB
MB
MB
MB
- Position brake caliper, mount and tighten
screws •.
Guideline
Screw, front brake caliper MB
- Mount cable clip
e.
25 Nm
(1B.4 Ibf
It)
17 Nm
(12.5 Ibf
It)
12 Nm
(8.9 Ibf ft)
20 Nm
(14.B Ibf
It)
15 Nm
(11.1 Ibf It)
Locti!.- 243'"
- Position the brake line and wiring harness. Put the clamp on, mount and tighten
screws •.
- Install the front wheel. (-- p. 71)
- Remove the fork legs. (-- p. 14)
- Remove screws. on the left fork leg. Remove the fork protector upwards.
- Remove the screws on the right fork leg. Remove the fork protector upwards.
- Position the fork protection on the left fork leg. Mount and tighten screws
O.
Guideline
15
I
Remaining screws, chassis
110 Nm (7.4 Ibf It)
I
- Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
I
Remaining screws, chassis
110 Nm (7.4 Ibf It)
I
- Install the fork legs. (-- p. 14)