401ELECTRIC STARTER
Cbeckinllhe ltal1er motor
193
Condition
The starter motor has been removed.
-
Connect the negative cable of a 12 volt power supply to the housing of the starter
motor. Connect the positive cable of the power supply briefly to connector 0 of the
starter motor.
>
If the starter motor does not turn when the circuit is closed:
-
Change the starter motor.
401ELECTRIC STARTER
Cbeckinllhe ltal1er motor
193
Condition
The starter motor has been removed.
-
Connect the negative cable of a 12 volt power supply to the housing of the starter
motor. Connect the positive cable of the power supply briefly to connector 0 of the
starter motor.
>
If the starter motor does not turn when the circuit is closed:
-
Change the starter motor.