Checking/Adjusting The Carburetor Components - KTM 400 EXC AUS 2011 Repair Manual

31/CARBURETOR
164
- Position and tighten hose clamp •.
- Attach engine vent hose • to the carburetor.
- Connect the cables.
- Check the throttle cable routing.
(r
p. 37)
- Move the handlebar to the straight-ahead position.
- Turn adjusting screw" in as far as possible.
- Turn adjusting screw. so that there is play in the throttle cable at the throttle
grip.
- Tighten nut •.
- Press and hold the throttle grip in the closed setting. Turn adjusting screw. out
until there is no play in the cable •.
- Tighten nut •.
- Position the carburetor cover. Mount and tighten
screw •.
- Push bellows. on. Check the throttle grip for smooth operation.
- Install the carburetor connection boot.
(r
p. 65)
- Install the fuel tank.
( r
p. 67)
- Check the play in the throttle cable.
(r
p. 38)
(EXC EU, EXC SIX DAYS)
- Check the choke cable play.
(r
p. 37)
- Carburetor - adjust the idle speed.
( r
p. 161)
Cbackinlfadjustinllha carnuratar componants
Condition
The carburetor has been removed.
- Check the throttle valve sensor.
( r
p. 165)
- Disassemble the carburetor.
(r
p. 165)
- Check the choke slide.
(r
p. 168)
- Check the jet needle.
( r
p. 168)
}-._.J
I
~:A
700073·01
31/CARBURETOR
164
- Position and tighten hose clamp •.
- Attach engine vent hose • to the carburetor.
- Connect the cables.
- Check the throttle cable routing.
(r
p. 37)
- Move the handlebar to the straight-ahead position.
- Turn adjusting screw" in as far as possible.
- Turn adjusting screw. so that there is play in the throttle cable at the throttle
grip.
- Tighten nut •.
- Press and hold the throttle grip in the closed setting. Turn adjusting screw. out
until there is no play in the cable •.
- Tighten nut •.
- Position the carburetor cover. Mount and tighten
screw •.
- Push bellows. on. Check the throttle grip for smooth operation.
- Install the carburetor connection boot.
(r
p. 65)
- Install the fuel tank.
( r
p. 67)
- Check the play in the throttle cable.
(r
p. 38)
(EXC EU, EXC SIX DAYS)
- Check the choke cable play.
(r
p. 37)
- Carburetor - adjust the idle speed.
( r
p. 161)
Cbackinlfadjustinllha carnuratar componants
Condition
The carburetor has been removed.
- Check the throttle valve sensor.
( r
p. 165)
- Disassemble the carburetor.
(r
p. 165)
- Check the choke slide.
(r
p. 168)
- Check the jet needle.
( r
p. 168)
}-._.J
I
~:A
700073·01