KTM 400 EXC AUS 2011 Repair Manual page 154

3MNGINE ASSEMBLY
- Carefully tap the piston into the cylinder using the handle of the hammer.
, / The piston rings should not catch or they will be damaged.
- Mount dowels. and put cylinder base gasket. in place.
- Ensure that piston mark. faces toward the exhaust side.
154
- Cover the engine case opening with a cloth. Thread the timing chain through the
chain shaft. Mount the piston pin.
• Info
I
In order to present them more clearly, the following steps are shown with a
removed piston.
- Position the piston pin retainer.
3MNGINE ASSEMBLY
- Carefully tap the piston into the cylinder using the handle of the hammer.
, / The piston rings should not catch or they will be damaged.
- Mount dowels. and put cylinder base gasket. in place.
- Ensure that piston mark. faces toward the exhaust side.
154
- Cover the engine case opening with a cloth. Thread the timing chain through the
chain shaft. Mount the piston pin.
• Info
I
In order to present them more clearly, the following steps are shown with a
removed piston.
- Position the piston pin retainer.