08!Mask, Fender; Removi Ng The Front Fender; Install I Ng The Front Fender; Removing Headlight Mask With Headlight - KTM 400 EXC AUS 2011 Repair Manual

O8IMASK, FENDER
69
- Remove screws •. Remove the front fender.
- Make sure the spacers remain in place.
- Ensure that the spacers are mounted in the fender.
- Position the front fender. Mount and tighten screws •.
Guideline
I
Remaining screws, chassis
110
Nm (7.4 Ibf It)
I
• Info
I
Make sure the holding lugs engage in the start number plate or headlight
mask.
- Switch off all electrical equipment.
- Remove screw. and take off clamp.
- Loosen the rubber band •. Push up the headlight mask and swing it forwards.
- Pull out the electric plug connector. and remove the headlight mask with the
headlight.
- Connect the electric plug connector ••
O8IMASK, FENDER
69
- Remove screws •. Remove the front fender.
- Make sure the spacers remain in place.
- Ensure that the spacers are mounted in the fender.
- Position the front fender. Mount and tighten screws •.
Guideline
I
Remaining screws, chassis
110
Nm (7.4 Ibf It)
I
• Info
I
Make sure the holding lugs engage in the start number plate or headlight
mask.
- Switch off all electrical equipment.
- Remove screw. and take off clamp.
- Loosen the rubber band •. Push up the headlight mask and swing it forwards.
- Pull out the electric plug connector. and remove the headlight mask with the
headlight.
- Connect the electric plug connector ••