Removing The Heim Joint - KTM 350 EXC-F EU Repair Manual

9 SHOCK ABSORBER, SWINGARM
9.19

Removing the heim joint

–
Remove screwsleeve
–
Remove adjusting screw
Info
Do not lose balls
200806-10
–
Remove rubber plug
–
From the opposite side, press rebound needle
200807-10
Condition
The shock absorber has been demounted.
–
Clamp the shock absorber in a vise using soft jaws.
–
Remove the collar bushing of the heim joint.
Pin (T120) (
–
Turn the shock absorber around and remove the second heim joint collar bushing.
200799-10
–
Remove seal ring
200800-10
–
Press the heim joint against a lock ring using the special tool.
Pressing tool (T1207S) (
–
Remove the second lock ring
200801-10

.

.

and spring.

.
p. 350)

on both sides.
p. 351)

.

out of the piston rod.
68