KTM 400 EXC AUS 2011 Repair Manual page 20

Ol/FORK, TRIPLE CLAMP
20
- Degrease the cartridge and clamp using the pecial tool.
I
Clamping stand (Tl4D15S) (-- p. 264)
- Warm up the cartridge in the area of •.
Guideline
15D
°C (122
OF)
- Unscrew and remove screwsleeve •.
200749-10
• Info
I
This step is unnecessary for the further disassembly.
- Degrease the piston rod.
- Clamp the piston rod with the special tool.
I
Clamping stand (Tl4D16S) (-- p. 265)
200697-10
- Remove nut •.
- Remove shim stack. completely.
- Remove piston •.
- Remove shim stack. completely.
- Remove spri ng 41.
- Remove tap rebound •.
- Remove spri ng •.
- Remove valve. of the rebound damping together with the spring.
- Take out the piston rod.
- 200701-10
Ol/FORK, TRIPLE CLAMP
20
- Degrease the cartridge and clamp using the pecial tool.
I
Clamping stand (Tl4D15S) (-- p. 264)
- Warm up the cartridge in the area of •.
Guideline
15D
°C (122
OF)
- Unscrew and remove screwsleeve •.
200749-10
• Info
I
This step is unnecessary for the further disassembly.
- Degrease the piston rod.
- Clamp the piston rod with the special tool.
I
Clamping stand (Tl4D16S) (-- p. 265)
200697-10
- Remove nut •.
- Remove shim stack. completely.
- Remove piston •.
- Remove shim stack. completely.
- Remove spri ng 41.
- Remove tap rebound •.
- Remove spri ng •.
- Remove valve. of the rebound damping together with the spring.
- Take out the piston rod.
- 200701-10