C
L
OMMAND
INE
Mirror Port Commands
This section describes how to configure port mirror sessions.
Command
port monitor
show port
monitor
port monitor
Use this command to configure a mirror session. Use the no form
to clear a mirror session.
Syntax
port monitor interface [rx | tx | both]
no port monitor interface
• interface
- ethernet unit/port (source port)
• rx - Mirror received packets.
• tx - Mirror transmitted packets.
• both - Mirror both received and transmitted packets.
Default Setting
No mirror session is defined. When enabled, the default
mirroring is for both received and transmitted packets.
Command Mode
Interface Configuration (Ethernet, destination port)
3-174
I
NTERFACE
Function
Configures a mirror session
Shows the configuration for a mirror
port
- unit - Switch (unit 1).
- port - Port number.
Mode Page
IC
3-174
PE
3-175