Description - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

Default Setting
None
Command Mode
Global Configuration
Example
To specify the Ethernet port, enter the following command:
Console(config)#interface ethernet 1/25
Console(config-if)#

description

Use this command to add a description to an interface. Use the no
form to remove the description.
Syntax
description string
no description
string - Comment or a description to help you remember
what is attached to this interface. (Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to Ethernet port 15.
Console(config)#interface ethernet 1/15
Console(config-if)#description RD-SW#3
Console(config-if)#
I C
NTERFACE OMMANDS
3-93