Command Usage; Show Users - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

Command Usage

• For a description of the items shown by this command, refer to
"Displaying System Information" on page 2-8
• The POST results should all display "PASS." If any POST test
indicates "FAIL," contact your distributor for assistance.
Example
Console#show system
System description: SMC8612T
System OID string: 1.3.6.1.4.1.202.20.25
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name
System Location
System Contact
MAC address
Web server
Web server port
Web secure server
Web secure server port : 443
POST result
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#

show users

Shows all active console and Telnet sessions, including user name,
idle time, and IP address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
S
YSTEM
: SMC8612T switch
: Boston
: Charles
: 00-30-f1-47-58-3a
: enable
: 80
: enable
:
M C
ANAGEMENT OMMANDS
3-53