Boot System - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot
command. See the table on the previous page for a description of
the file information displayed by this command.
Console#whichboot
----------------- -------------- ------- -----------
Console#

boot system

Use this command to specify the file or image used to start up the
system.
Syntax
boot system {boot-rom| config | opcode}: filename
The type of file or image to set as a default includes:
• boot-rom - Boot ROM
• config - Configuration file
• opcode - Run-time operation code
The colon (:) is required.
filename - Name of the configuration file or image name.
Default Setting
None
Command Mode
Global Configuration
3-26
I
NTERFACE
file name
diag_0060 Boot-Rom image
run_0200 Operation Code
startup Config File
file type startup size (byte)
Y 111360
Y 1083008
Y 2710