Gvrp And Bridge Extension Commands - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

Default Setting
Shows all VLANs.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows how to display information for
VLAN 1:
Console#show vlan id 1
VLAN Type
---- ------- ---------------- --------- ---------------------------------------
1 Static
Console#

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register
VLAN members on interfaces across the network. This section
describes how to enable GVRP for individual interfaces and
globally for the switch, as well as how to display default
configuration settings for the Bridge Extension MIB.
Command
Interface Commands
switchport gvrp
switchport forbidden
vlan
show gvrp configuration Displays GVRP configuration for
garp timer
Name Status
DefaultVlan
Function
Enables GVRP for an interface
Configures forbidden VLANs for
an interface
selected interface
Sets the GARP timer for the
selected function
GVRP B
AND RIDGE
Ports/Channel groups
Active Eth1/ 1 Eth1/ 2 Eth1/ 3 Eth1/ 4 Eth1/ 5
Eth1/ 6 Eth1/ 7 Eth1/ 8 Eth1/ 9 Eth1/10
Eth1/11 Eth1/12
E C
XTENSION OMMANDS
Mode Page
IC
IC
NE,
PE
IC
3-142
3-139
3-143
3-144
3-141