Navigating The Web Browser Interface - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C
ONFIGURING THE
Notes: 1. You are allowed three attempts to enter the correct
2. If you log into the Web interface as guest (Normal Exec
3. If the path between your management station and this

Navigating the Web Browser Interface

To access the Web-browser interface you must first enter a user
name and password. The administrator has Read/Write access to
all configuration parameters and statistics. The default user name
and password for the administrator is "admin."
2-2
S
WITCH
password; on the third failed attempt the current
connection is terminated.
level), you can view page information but only change
the guest password. If you log in as "admin" (Privileged
Exec level), you can apply changes on all pages.
switch does not pass through any device that uses the
Spanning Tree Protocol, then you can set the switch
port attached to your management station to fast
forwarding to improve the switch's response time to
management commands issued through the Web
interface. (See "STP Port and Trunk Configuration" on
page 2-65.)