Web – Click IGMP, Static Multicast Router Port Configuration.
Specify the interfaces attached to a multicast router, indicate the
VLAN which will forward all the corresponding multicast traffic,
and then click Add. After you have completed adding interfaces to
the list, click Apply.
CLI – This example configures port 11 as a multicast router port
within VLAN 1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11 3-158
Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Port Type
---- ------------------ -------
1
Displaying Port Members of Multicast Services
You can display the port members associated with a specified
VLAN and multicast IP address.
Command Attribute
•
VLAN ID – Selects the VLAN in which to display port members.
•
Multicast IP Address – The IP address for a specific multicast
service
Eth 1/11
Static
M
C
ULTICAST
ONFIGURATION
3-159
2-119
Need help?
Do you have a question about the SMC EZ Switch 10/100/1000 SMCGS8P-Smart and is the answer not in the manual?
Questions and answers