Ip Igmp Snooping Query-Count - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE
Command Usage
If enabled, the switch will serve as querier if elected. The
querier is responsible for asking hosts if they want to receive
multicast traffic.
Example
Console(config)#ip igmp snooping querier
Console(config)#

ip igmp snooping query-count

Use this command to configure the query count. Use the no form
to restore the default.
Syntax
ip igmp snooping query-count count
no ip igmp snooping query-count
count - The maximum number of queries issued for which
there has been no response before the switch takes action
to solicit reports. (Range: 2-10)
Default Setting
2 times
Command Mode
Global Configuration
Command Usage
The query count defines how long the querier waits for a
response from a multicast client before taking action. If a
querier has sent a number of queries defined by this command,
but a client has not responded, a countdown timer is started
using the time defined by ip igmp snooping query-max-
response-time. If the countdown finishes, and the client still
has not responded, then that client is considered to have left
the multicast group.
3-154
I
NTERFACE