Creating Vlans - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

• Status – Shows if this VLAN is enabled or disabled.
- Active: VLAN is operational.
- Suspend: VLAN is suspended; i.e., does not pass packets.
• Ports / Channel groups – Shows the VLAN interface
members.
CLI – Current VLAN information can be displayed with the
following command.
Console#show vlan id 1
VLAN Type
---- ------- --------------- --------- ------------------------------------
1 Static
Console#

Creating VLANs

Use The VLAN Static List to create or remove VLAN groups. To
propagate information about VLAN groups used on this switch to
external network devices, you must specify a VLAN ID for each of
these groups.
Command Attributes
• Current – Lists all the current VLAN groups created for this
system. Up to 255 VLAN groups can be defined. VLAN 1 is the
default untagged VLAN.
• New – Allows you to specify the name and numeric identifier
for a new VLAN group. (The VLAN name is only used for
management on this system; it is not added to the VLAN tag.)
• VLAN ID – ID of configured VLAN (1-4094, no leading zeroes).
• Name – Name of the VLAN (1 to 32 characters).
Name Status
DefaultVlan Active
VLAN C
Ports/Channel groups
Eth1/ 1 Eth1/ 2 Eth1/ 3 Eth1/ 4 Eth1/5
Eth1/ 6 Eth1/ 7 Eth1/ 8 Eth1/ 9 Eth110
Eth1/11 Eth1/12
ONFIGURATION
3-140
2-77