Vlan Commands - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the
network, but communicate as though they belong to the same
physical segment. This section describes commands used to create
VLAN groups, add port members, specify how VLAN tagging is
used, and enable automatic VLAN registration for the selected
interface.
Command
Edit VLAN Groups
vlan database
vlan
Configure VLAN Interfaces
interface vlan
switchport mode
switchport
acceptable-frame-
types
switchport
ingress-filtering
switchport native
vlan
switchport allowed
vlan
switchport gvrp
switchport forbidden
vlan
3-130
I
NTERFACE
Function
Enters VLAN database mode to add,
change, and delete VLANs
Configures a VLAN, including VID,
name and state
Enters interface configuration mode
for specified VLAN
Configures VLAN membership
mode for an interface
Configures frame types to be
accepted by an interface
Enables ingress filtering on an
interface
Configures the PVID (native VLAN)
of an interface
Configures the VLANs associated
with an interface
Enables GVRP for an interface
Configures forbidden VLANs for an
interface
Mode Page
GC 3-131
VC 3-132
IC 3-133
IC 3-134
IC 3-135
IC 3-136
IC 3-137
IC 3-138
IC 3-142
IC 3-139