Stp Port And Trunk Configuration - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

CLI – This example displys the current Spanning Tree status of a
port.
Console#show spanning-tree ethernet 1/5
Eth 1/ 5 information
--------------------------------------------------------------
Admin status
Role
State
Path cost
Priority
Designated cost
Designated port
Designated root
Designated bridge
Fast forwarding
Forward transitions
Admin edge port
Oper edge port
Admin Link type
Oper Link type
Console#

STP Port and Trunk Configuration

You can configure RSTP attributes for specific interfaces, including
port priority, path cost, link type, and edge port. You may use a
different priority or path cost for ports of same media type to
indicate the preferred path, link type to indicate a point-to-point
connection or shared-media connection, and edge port to indicate
if the attached device can support fast forwarding. (References to
"ports" in this section means "interfaces," which includes both
ports and trunks.)
S T
PANNING
: enable
: designate
: forwarding
: 100000
: 128
: 0
: 128.5
: 32768.000011112222
: 32768.000011112222
: disable
: 1
: disable
: disable
: auto
: point-to-point
P C
REE ROTOCOL ONFIGURATION
3-128
2-65