Configuring Port Mirroring - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C
ONFIGURING THE
Web – Click Port, Port Broadcast Control. Set the threshold for all
ports, and then click Apply.
CLI – Specify the required interface, and then enter the threshold.
The following sets broadcast suppression at 128 packets per
second on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport broadcast packet-rate 128
Console(config-if)#

Configuring Port Mirroring

You can mirror traffic from any source port to a target port for
real-time analysis. You can then attach a logic analyzer or RMON
probe to the target port and study the traffic crossing the source
port in a completely unobtrusive manner.
2-42
S
WITCH
3-92
3-100