Show Interfaces Status - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command
sets the base value for displayed statistics to zero for the
current management session. However, if you log out and back
into the management interface, the statistics displayed will
show the absolute value accumulated since the last power
reset.
Example
The following example clears statistics on port 5.
Console#clear counters ethernet 1/5
Console#

show interfaces status

Use this command to display the status for an interface.
Syntax
show interfaces status interface
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
- unit - This is device 1.
- port - Port number.
I C
NTERFACE OMMANDS
3-103