Saving Or Restoring Configuration Settings - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C
ONFIGURING THE
CLI – Enter the IP address of the TFTP server, select config or
opcode file type, then enter the source and destination file names,
set the new file to start up the system, and then restart the switch.
Console#copy tftp file
TFTP server ip address: 10.1.0.99
Choose file type:
1. config:
Source file name: v10.bix
Destination file name: V10000
/
Console#config
Console(config)#boot system opcode: V10000
Console(config)#exit
Console#reload

Saving or Restoring Configuration Settings

You can upload/download configuration settings to/from a TFTP
server. The configuration file can be later downloaded to restore
the switch's settings.
Command Attributes
• TFTP Server IP Address – The IP address of a TFTP server.
• Destination File Name — File names are case-sensitive. The
file name should not contain slashes (\ or /), the leading letter
of the file name should not be a period (.), and the maximum
length for file names on the TFTP server is 127 characters or 31
characters for files on the switch. (Valid characters: A-Z, a-z, 0-9,
".", "-", "_")
Note: The maximum number of user-defined configuration files is
limited only by available flash memory space.
2-28
S
WITCH
2. opcode: <1-2>: 2
3-21
3-26
3-18