Password - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

• This command controls login authentication via the switch
itself. To configure user names and passwords for remote
authentication servers, you must use the RADIUS software
installed on those servers.
Example
Console(config-line)#login local
Console(config-line)#
Related Commands
username (3-30)

password (3-83)

password
Use this command to specify the password for a line. Use the no
form to remove the password.
Syntax
password {0 | 7} password
no password
- {0 | 7} - 0 means plain password, 7 means encrypted
- password - Character string that specifies the line password.
Default Setting
No password is specified.
Command Mode
Line Configuration
password
(Maximum length: 8 characters plain text, 32 encrypted,
case sensitive).
L C
INE OMMANDS
3-83