Snmp Commands - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE
Example
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with radius server:
Server port number: 49
Console#

SNMP Commands

Controls access to this switch from SNMP management stations, as
well as the error types sent to trap managers.
Command
snmp-server
community
snmp-server
contact
snmp-server
location
snmp-server host
snmp-server
enable traps
snmp ip filter
show snmp
3-64
I
NTERFACE
Function
Sets up the community access string to
permit access to SNMP commands
Sets the system contact string
Sets the system location string
Specifies the recipient of an SNMP
notification operation
Enables the device to send SNMP
notifications (i.e., SNMP traps)
Sets IP addresses of clients allowed to
management access to the switch via
SNMP
Displays the status of SNMP
communications
Mode Page
GC 3-65
GC 3-66
GC 3-66
GC 3-67
GC 3-69
GC 3-70
NE, 3-71
PE