Show Interfaces Counters - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE
Command Usage
• If no interface is specified, information on all interfaces is
displayed.
• For a description of the items displayed by this command, see
"Displaying Connection Status" on page 2-36.
Example
Console#show interface status ethernet 1/5
Information of Eth 1/5
Basic information:
Port type: 1000T
Mac address: 00-00-11-11-22-27
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full, 1000full,
Broadcast storm: Enabled
Broadcast storm limit: 256 packets/second
Flow control: Disabled
Lacp: Disabled
Port security: Disabled
Port security action: None
Current status:
Link status: Up
Port operation status: Up
Operation speed-duplex: 100full
Flow control type: None
Console#

show interfaces counters

Use this command to display statistics for an interface.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-6)
3-104
I
NTERFACE
- unit - This is device 1.
- port - Port number.