General Commands; Enable - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE

General Commands

Command

enable

disable
configure
reload
end
exit
quit
help
?
enable
Use this command to activate Privileged Exec mode. In privileged
mode, additional commands are available, and certain commands
display additional information. See "Understanding Command
Modes" on page 3-7.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec. Enter level 15 to access
Privileged Exec mode.
Default Setting
Level 15
3-14
I
NTERFACE
Function
Activates privileged mode
Returns to normal mode from privileged
mode
Activates global configuration mode
Restarts the system
Returns to Privileged Exec mode
Returns to the previous configuration
mode, or exits the CLI
Exits a CLI session
Shows how to use help
Shows options for command completion
(context sensitive)
Mode Page
NE 3-14
PE 3-15
PE 3-16
PE 3-18
GC, IC, 3-18
LC, VC
any 3-19
NE, PE 3-19
any NA
any NA