Ip Http Secure-Server - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

ip http secure-server

Use this command to enable the secure hypertext transfer protocol
(HTTPS) over the Secure Socket Layer (SSL), providing secure
access (i.e., an encrypted connection) to the switch's Web
interface. Use the no form to disable this function.
Syntax
ip http secure-server
no ip http secure-server
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
• Both HTTP and HTTPS service can be enabled independently.
• If you enable HTTPS, you must indicate this in the URL:
https://device[port_number]
• When you start HTTPS, the connection is established in this
way:
- The client authenticates the server using the server's digital
certificate.
- The client and server negotiate a set of security protocols to
use for the connection.
- The client and server generate session keys for encrypting
and decrypting data.
• The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet
Explorer 5.x and Netscape Navigator 4.x.
S M
YSTEM ANAGEMENT
C
OMMANDS
3-35