Address Table Commands - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

• Priority for untagged traffic – Indicates the default priority
for untagged frames (page 3-160).
• Gvrp status – Shows if GARP VLAN Registration Protocol is
enabled or disabled (page 3-142).
• Allowed Vlan – Shows the VLANs this interface has joined,
where "(u)" indicates untagged and "(t)" indicates tagged
(page 3-138).
• Forbidden Vlan – Shows the VLANs this interface can not
dynamically join via GVRP (page 3-139).
Example
This example shows the configuration setting for Ethernet port 15.
Console#show interfaces switchport ethernet 1/15
Information of Eth 1/15
broadcast threshold: Enabled, 256 packets/second
Lacp status: Disabled
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Enabled
Allowed Vlan:
Forbidden Vlan:
Console#

Address Table Commands

These commands are used to configure the address table for
filtering specified addresses, displaying current entries, clearing the
table, or setting the aging time.
Command
mac-address-table
static
show
mac-address-table
1(u),
Function
Maps a static address to a port in a
VLAN
Displays entries in the forwarding
database
A T
DDRESS ABLE
Mode Page
GC
PE
C
OMMANDS
3-108
3-109
3-107