Show Spanning-Tree - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE
• RSTP only works on point-to-point links between two bridges.
If you designate a port as a shared link, RSTP is forbidden.
Example
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree link-type point-to-point
Console(config-if)#

show spanning-tree

Use this command to show the configuration for the Spanning
Tree.
Syntax
show spanning-tree [interface]
• interface
• ethernet unit/port-number
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use the show spanning-tree command with no parameters to
display the Spanning Tree configuration for the Spanning Tree
and for every interface in the tree.
• Use the show spanning-tree interface command to display
the Spanning Tree configuration for an interface within the
Spanning Tree
3-128
I
NTERFACE
- unit - This is device 1.
- port-number