Mac-Address-Table Static - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

C L
OMMAND INE
Command
clear
mac-address-table
dynamic
mac-address-table
aging-time
show
mac-address-table
aging-time

mac-address-table static

Use this command to map a static address to a port in a VLAN. Use
the no form to remove an address.
Syntax
mac-address-table static mac-address interface interface
vlan vlan-id [action]
no mac-address-table static mac-address vlan vlan-id
• mac-address - MAC address.
• interface
• ethernet unit/port
• port-channel channel-id (Range: 1-4)
• vlan-id - VLAN ID (Range: 1-4094)
• action -
• delete-on-reset - Assignment lasts until switch is reset.
• permanent - Assignment is permanent.
Default Setting
No static addresses are defined. The default mode is
permanent.
3-108
I
NTERFACE
Function
Removes any learned entries from the
forwarding database
Sets the aging time of the address table GC
Showsthe aging time for the address
table
- unit - This is device 1.
- port - Port number.
Mode Page
PE 3-111
3-111
PE 3-112