Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the
system displays all files.
• File information is shown below:
Column Heading
file name
file type
startup
size
Example
The following example shows how to display all file information:
Console#dir
-------------------------------- -------------- ------- -----------
Factory_Default_Config.cfg
-------------------------------------------------------------------
Console#
whichboot
Use this command to display which files booted.
Default Setting
None
Description
The name of the file.
File types: Boot-Rom, Operation Code, and
Config file.
Shows if this file is used when the system is
started.
The length of the file in bytes.
file name
diag_0060 Boot-Rom image
run_01642 Operation Code
run_0200 Operation Code
Config File
startup
Config File
F
/F
LASH
file type startup size (byte)
Total free space:
C
ILE
OMMANDS
Y
111360
N
1074304
Y
1083008
N
2574
Y
2710
0
3-25