System Management Commands - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

Command Usage
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.
Example
Console(config)#boot system config: startup
Console(config)#
Related Commands
dir (3-24)
whichboot (3-25)

System Management Commands

These commands are used to control system logs, passwords, user
name, browser configuration options, and display or configure a
variety of other system information.
Command
Device Description Command
hostname
User Access Commands
username
enable password Sets a password to control access to
Jumbo Frame Command
jumbo frame
Web Server Commands
ip http port
Function
Specifies or modifies the host name for
the device
Sets user name authentication at login
various privilege levels
Allows jumbo frames to pass through the
switch
Specifies the port to be used by the Web
browser interface
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 3-29
GC 3-30
GC 3-31
GC 3-32
GC 3-33
3-27