SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual page 352

U F
PGRADING IRMWARE VIA THE
4. When the switch initialization screen appears, enter
firmware-download mode by pressing <Ctrl><u> immediately
after power on. Screen text similar to that shown below
displays:
File Name
--------------------------------- ---- ---- ---------- -----------
$certificate
$logfile_1
Factory_Default_Config.cfg
diag_1000
r_20019
set-ip.cfg
--------------------------------- ---- ---- ---------- ----------
[X]modem Download
[C]hange Baudrate
Select>
5. Press <C> to change the baud rate of the switch's serial
connection.
6. Press <B> to select the option for 115200 baud.
There are two baud rate settings available, 9600 and 115200.
Using the higher baud rate minimizes the time required to
download firmware code files.
7. Set your PC's terminal emulation software to match the 115200
baud rate. Press <Enter> to reset communications with the
switch.
Select>
Change baudrate [A]9600 [B]115200
Baudrate set to 115200
8. Check that the switch has sufficient flash memory space for the
new code file before starting the download.
B-2
S P
ERIAL ORT
S/Up Type Size
[D]elete File [S]et Startup File
[Q]uit
0 7 20480
0 3 64
0 5 2574
1 1 116228
1 2 1536972
1 5 2690
Create Time
00:38:34
00:00:02
00:00:12
00:00:00
00:00:01
00:40:44