SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual page 157

Parameter
FCS Errors
Excessive Collisions
Single Collision Frames The number of successfully transmitted frames
Internal MAC Transmit
Errors
Multiple Collision
Frames
Carrier Sense Errors
SQE Test Errors
Frames Too Long
Deferred Transmissions A count of frames for which the first transmission
Internal MAC Receive
Errors
Description
A count of frames received on a particular
interface that are an integral number of octets in
length but do not pass the FCS check. This count
does not include frames received with
frame-too-long or frame-too-short error.
A count of frames for which transmission on a
particular interface fails due to excessive
collisions. This counter does not increment
when the interface is operating in full-duplex
mode.
for which transmission is inhibited by exactly
one collision.
A count of frames for which transmission on a
particular interface fails due to an internal MAC
sublayer transmit error.
A count of successfully transmitted frames for
which transmission is inhibited by more than
one collision.
The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame.
A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface.
A count of frames received on a particular
interface that exceed the maximum permitted
frame size.
attempt on a particular interface is delayed
because the medium was busy.
A count of frames for which reception on a
particular interface fails due to an internal MAC
sublayer receive error.
S D
HOWING EVICE
S
TATISTICS
2-125