Spanning-Tree Transmission-Limit - SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual

spanning-tree transmission-limit

Use this command to configure the minimum interval between the
transmission of consecutive RSTP BPDUs. Use the no form to
restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limit the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree transmission-limit 4
Console(config)#
S T
PANNING REE
C
OMMANDS
3-121