Uniden BCD996XT User Manual page 1040

BC346XTSettings < UnidenMan4 < TWiki
Band Defaults
Use this menu to change the default modulation and frequency step or spacing used for
each band. The scanner displays the list of available bands in the following format:
{Frequency} : {modulation type} / {step}
Select the frequency band you want to edit. The scanner prompts you for the following
information:
Set Modulation
Select the type of modulation you want the scanner to use as the default for this band:
AM, Narrowband FM (NFM), FM, Wideband FM (WFM), or FM broadcast (FMB).
Set Step
Select the number of kHz between each frequency or channel step: 5.0, 6.25, 7.5, 8.33,
10.0, 12.5, 15.0, 20.0, 25.0, 50.0, or 100.0 kHz.
See Scanner Info
This menu lets you see detailed information about the memory and firmware.
% Memory Used
See the percent of overall memory used ( Memory Used ) along with the number of
programmed Systems, Sites , and channels ( CHN ) and the percent of available memory
positions used for each.
Firmware Version
See the firmware version ( Version ) and the serial number ( SN ) of the scanner.
This page applies to the following scanner(s):
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20D...nts/temp/CDImage_090515/Manual/BC346XTSettings.html (4 of 5)5/26/2009 11:16:47 AM
BC346XT Users