Uniden BCD996XT User Manual page 1043

BC346XTSrchCloCallOpt < UnidenMan4 < TWiki
UHF TV (470.0000 - 512.0000 MHz)
VHF TV (54.0000 - 72.0000, 76.0000 - 88.0000, and 174.0000 - 216.0000 MHz)
NOAA WX (161.6500, 161.7750, 162.4000, 162.4250, 162.4500, 162.4750,
162.5000, 162.5250, 162.5500, and 163.2750 MHz)
Your options for broadcast screening are listed below:
Set All Band On
Turn on screening for all broadcast bands and ignore any hits on these frequencies.
Set All Band Off
Turn off screening for all broadcast bands, and treat hits on these frequencies the same as
any other band.
Set Each Band
Turn screening on or off for each band individually. The scanner displays the bands
listed above. Select the band you want to change, then press YES to toggle the setting.
Program Band
Create up to 10 custom bands that you want the scanner to screen out hits on.
1. Select a custom band slot (Band 1 through Band 10).
2. When the scanner prompts you, input the lower frequency limit.
3. When the scanner prompts you, input the upper frequency limit.
4. Once you create the custom band, turn screening on or off the same way you did
for the preset bands.
CTCSS/DCS Search
Turn this feature on if you want the scanner to search an active frequency for CTCSS/
DCS tones. (The scanner ignores this setting in AM, WFM, and FMB bands.)
Repeater Find
file:///C|/Documents%20and%20Settings/POpitz/My%20...p/CDImage_090515/Manual/BC346XTSrchCloCallOpt.html (2 of 3)5/26/2009 11:16:48 AM